17
TURNING ON/OFF TONE SOUND
NOTE:
• Anytime during set up, inserting a CALLA Test Strip will begin testing. The
changes you have done so far will be memorized by the meter.
Step 3:
Press button to select the next function to setup or insert a
test strip and begin testing. You can also turn o the meter by
press and hold the OK button until the display screens shows OFF.
Setting the tone when the meter is turned o
Step 1:
Press and hold the OK button until the display screen displays
“FunC”.
Step 2:
Release the OK button and the meter will light up, showing all its
segments. The current date and time will ash. If error messages
(Err 1, Err 2, etc) appear, see page 45, Solving Problems.
To Next Page
Loading...
