Wellion CALLA Light User Manual

25
SETTING ALARMS
NOTE:
• Hold down the or buttons during hour or minute selection to scroll
through the numbers quickly.
Step 6:
Press or buttons to set up the next alarm(s).
There are three alarms which can be set. Follow steps
3 through 5 to set the additional alarms. After nishing
setting up the alarms, press or buttons to “End”
selection to exit alarm setting.

Wellion CALLA Light Specifications

General

Test Time	5 seconds
Display	LCD
Blood Sample	Capillary Whole Blood
Measurement Range	20 to 600 mg/dL
Sample Size	0.6 µL
Memory Capacity	500 test results
Operating Temperature	10 to 40 °C
Operating Humidity	10 to 85% RH
Automatic Shut Off	After 2 minutes
Battery Type	CR2032
Automatic Coding	Automatic Coding