Wellion CALLA Light - Page 27

27
Materials you will need:
Your Wellion CALLA Light Meter
Wellion CALLA Control Solution
A new Wellion CALLA Blood Glucose Test Strip
Step 1:
Insert a Wellion CALLA Blood Glucose Test Strip into the meter
with the arrow mark facing up. Make sure the test strip contact
points are inserted all the way into the meter. Close the test strip
bottle immediately after taking out a strip.
CONTROL SOLUTION TESTING
IMPORTANT:
• Do not use test strip that has expired. Check the expiration date that is printed
on the test strip bottle and its package.
• Use each test strip immediately after removing it from the bottle
• Do not use wet or damaged test strips.
• Keep away from direct sunlight and heat. Store the test strip bottle in a dry,
cool place.
• Record the „date opened“ on the test strip bottle label when you rst open it.
6 months after rst opened date, discard the bottle and any remaining test
strips.