46
SOLVING PROBLEMS
“Test strip was remo-
ved too early during
testing”
• Repeat the test with a new test strip.
• If problem persists, contact your
authorized distributor.
“Extreme conditions:
Big temperature dif-
ference”
• Move the meter into an area that
is between 10°C to 40°C, and allow
10 to 15 minutes for it to reach the
new temperature.
“The meter is dama-
ged”
• Replace the batteries and turn on the
meter again.
• If problem persists, contact your
authorized distributor.
To Next Page
Loading...
