SPECIFIC SAFETY RULES FOR THE SCREWDRIVER
WARNING: Do not let comfort or familiarity with the product replace strict adherence to
product safety rules. Failure to follow the safety instructions may result in serious personal injury.
6
1. TOOL PURPOSE. This screwdriver is designed to fasten and remove screws from wood, plastic, and
light-gauge metal. Screwing into other materials could result in fire, injury, or damage to the work-
piece. Hex bits with a straight shank of a diameter of 1/4-inch can be used. Using the machine for any
other purpose for which it is not designed may result in serious injuries, machine damage and voiding
of the warranty.
2. PERSONAL SAFETY.
• Always wear ANSI Z87.1-approved glasses with side shields and a dust mask.
• DO NOT wear loose clothing or jewelry, as they might get drawn in by the tool. Tie back long hair.
• DO NOT wear gloves while operating this tool.
3. TOOL & ACCESSORIES INSPECTION. Before operation, check the tool and accessories for any dam-
age or missing parts. Do not use the tool if any part is missing or damaged. Make sure all adjustments
are correct and all connections are tight. Keep all guards in place.
4. Screwdriver ACCESSORIES.
• Do not use bits or any accessories that are damaged or worn.
• Make sure the bit is securely locked in the chuck.
• Always turn off the unit before doing any cleaning or maintenance.
• Do not use the charging cable if it is damaged.
5. WORKPIECE REQUIREMENTS. Check the workpiece carefully for splits, knots, nails, or other ob-
structions. These types of blemishes may cause a safety risk during operation.
6. Hold the screwdriver only by the insulated gripping surfaces during operation. Fasteners that con-
tact hidden wiring may make the exposed metal parts of the power tool “live” and could electrically
shock the operator.
7. Store the screwdriver and charger indoors in dry condition. Do not expose the screwdriver or the
charging cable to temperatures over 104°F (40°C).
8. Be sure you always have a firm footing and hold the tool firmly. Keep hands, hair and other beloved
body parts away from the rotating components of the tool.
9. Always secure the workpiece, especially if the workpiece is small.
10. Use the appropriate bits suitable for the material and the operating speed.
11. Do not touch the bit or the workpiece immediately after operation. They may be hot and could burn
your skin.
To Next Page
Loading...
Need help?
General
