SAFETY RULES FOR BATTERIES AND CHARGERS
9
USING THE BATTERY
1. Only use the tool with the battery specified by the manufacturer. Use of any other battery packs may
result in a risk of injury and fire.
2. Under abusive conditions, liquid may be ejected from the battery. Avoid contact with this liquid like
you would a fire or an ex-lover. If contact accidentally occurs, flush the contact area with water. If the
liquid contacts your eyes, flush with water for 10 minutes and then seek medical help. Liquid ejected
from the battery may cause irritation or burns.
3. If operating time has become excessively shorter, stop operating immediately. It may result in over-
heating, burning, or even an explosion.
MAINTAINING THE BATTERY AND CHARGING CABLE
1. To reduce the risk of electric shock, always unplug the charger from the outlet before attempting
any maintenance or cleaning.
2. Protect the battery charging cable from damage. Keep the charging cable away from heat, oil and
sharp edges. Keep the tool out of the reach of children.
3. Do not remove the battery pack from the tool.
4. Store the tool and battery pack in a location where temperatures will not exceed 104 °F (40 °C). This
will help prevent serious damage to the battery cells.
5. Do not disassemble the charging cable or the tool. Take these to a qualified service technician when
service or repairs are required. Incorrect assembly may result in electric shock or fire.
6. Do not dispose of the battery or the tool in fire or with household waste. Take it to your local recy-
cling facility.
To Next Page
Loading...