Wen 6560

Model # 6560
6-INCH BENCHTOP
JOINTER
bit.ly/wenvideo
Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years
of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings,
and cautions. If you use your tool properly and for intended purpose, you will enjoy years of safe,
reliable service.
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
(M-F 8AM-5PM CST)
WEN

Wen 6560 Specifications

General

Brand	Wen
Model	6560
Category	Power Tool
Language	English

Summary

Technical Data

General Safety Rules

Specific Rules for the Jointer

Safety rules specific to jointer operation, covering 16 key points.

Electrical Information

Grounding Instructions

Explains the importance of grounding for electrical safety and proper connection procedures.

Know Your Jointer

Assembly and Adjustments

Provides instructions and diagrams for assembling and adjusting the jointer components.

Operation

Adjust the Depth of Cut

Details how to adjust the depth of cut using the handwheel and infed table.

Positioning the Fence

Instructions on setting the fence angle from 0 to 45 degrees for jointer operations.

OnOff Switch

Explains the function and operation of the jointer's on/off switch for safe use.

Testing the Blade Height

How to check and adjust the blade height for optimal cutting performance.

Feeding Work

Guidance on feeding workpiece through the jointer, including feed rate and push stick usage.

Beveling and Chamfering

Instructions for setting the fence to perform beveling and chamfering operations.

Maintenance

Check for Worn Blades

Guidance on inspecting blades for wear and determining when replacement is needed.

Replacing Blades

Step-by-step instructions for removing and installing new jointer blades.

Brush Inspection and Replacement

How to inspect and replace motor brushes for continued operation.

Exploded View and Parts List

Limited Two Year Warranty