Wen AT6535

TABLE OF CONTENTS
Specifications .................................................................................2
Introduction ....................................................................................3
General Safety Rules .......................................................................4
Specific Safety Rules for the Spindle Sander ....................................5
Electrical Information ......................................................................8
Know Your Spindle Sander ...............................................................9
Assembly & Adjustments ...............................................................10
Operation ......................................................................................14
Maintenance .................................................................................15
Troubleshooting Guide ...................................................................16
Exploded View & Parts List ............................................................17
Warranty Statement ......................................................................20
SPECIFICATIONS
Model Number AT6535
Power 120V AC, 60 Hz, 3.5A
Motor Speed (No-Load) 2000 RPM
Spindle Oscillation (No-Load) 58 OPM
Spindle Diameter 1/2"
Rubber Drum Diameter (4)
3/4", 1", 1-1/2", 2"
19 mm, 26 mm, 38 mm, 51 mm
Sanding Sleeve Diameter (5)
1/2", 3/4", 1", 1-1/2", 2" (80-Grit)
13 mm, 19 mm, 26 mm, 38 mm, 51 mm
Dust Port Size 2" O.D., 1-7/8" I.D.
Work Table Bevel Angle 0º to 45º
Table Dimensions 14-1/2 x 14-1/2 in.
IP Rating IP20
Product Net Weight 33.2 lbs
Assembled Dimensions 14-3/4 x 14-3/4 x 16-3/4 in.
Sanding sleeves of various grits can be purchased from wenproducts.com
by searching your product's model number AT6535
2