Wen BA3962

10-INCH BAND SAW
WITH STAND
Instruction Manual
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM1-800-232-1195 (M-F 8AM-5PM CST)
For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM
MODEL BA3962

Wen BA3962 Specifications

General

Brand	Wen
Model	BA3962
Category	Saw
Language	English

Summary

General Safety Rules for Power Tools

Electrical Safety Precautions

Guidelines for safe use of electrical power tools, including cord and outlet safety to prevent shock.

Personal Safety Measures

Recommendations for operator alertness, PPE, and proper attire while operating tools to prevent injury.

Additional General Safety Rules and Warnings

Specific Safety Rules for Band Saw Operation

Saw Blade Safety Precautions

Safety measures for handling, installing, and using saw blades to prevent injury and accidents.

Personal Safety for Band Saw Use

Securing the Workpiece

Specific Rules for Your Band Saw (Continued)

Safe Cutting Operations

Guidelines for safe operation during cutting, including body positioning, feed rate, and guard usage.

Electrical Information and Grounding

Grounding Instructions

Detailed instructions on proper grounding of the tool for electrical shock prevention and safety.

Assembly and Adjustments Overview

Assembling the Band Saw Stand

Installing the Table

Further Assembly and Adjustments

Setting Stops and Blade Tracking

Setting 0 and 45 Stops

Adjusting Blade Tracking

Guide to adjusting blade tracking to ensure the blade runs smoothly on the wheels.

Blade Tension and Upper Blade Guide

Adjusting Blade Tension

Procedure for adjusting blade tension to the correct level for safe and effective cutting.

Adjusting the Upper Blade Guide

Adjusting Upper Guide Bearings

Steps for adjusting upper guide bearings to prevent blade drift and prolong component life.

Advanced Guide Bearing Adjustments

Fine-Tuning Upper Guide Bearings

Detailed steps for precise adjustment of upper guide bearings and thrust bearing.

Adjusting Lower Guide Bearings

Instructions for adjusting the lower guide bearings for optimal blade support and performance.

Adjusting Cutting Speed and Operation

Adjusting Cutting Speed

Band Saw Operation Basics

Using the Power Switch and Safety Key

General Cutting and Blade Changes

General Cutting Guidelines

Changing the Band Saw Blade

Step-by-step instructions for safely removing and installing a new band saw blade.

Band Saw Maintenance

Routine Inspection Checklist

Cleaning and Storage Procedures

Troubleshooting Guide for Band Saw Issues

Troubleshooting: Band Saw Wont Start (No Sound)

Solutions for issues where the band saw does not power on or make any sound.

Troubleshooting: Band Saw Hum but Wont Start

Solutions for when the band saw hums but fails to start due to electrical or mechanical issues.

Troubleshooting: Blade Tracking Issues

Solutions for problems where the band saw blade does not track correctly on the wheels.

More Troubleshooting Tips

Troubleshooting: Blade Drifting

Causes and solutions for when the band saw blade drifts off course during cutting.

Troubleshooting: Noisy Band Saw

Exploded View and Parts List

Exploded View and Parts List (Part 1)

Exploded View and Parts List (Part 2)

Exploded View and Parts List (Part 3)