Wen BA1487

14-INCH TWO-SPEED
BAND SAW WITH STAND
Instruction Manual
IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability,
ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use
your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
TECHSUPPORT@WENPRODUCTS.COM1-800-232-1195 (M-F 8AM-5PM CST)
For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM
MODEL BA1487

Wen BA1487 Specifications

General

Brand	Wen
Model	BA1487
Category	Saw
Language	English

Summary

General Safety Rules for Band Saw Operation

Work Area Safety Guidelines

Electrical Safety Precautions

Precautions related to electrical connections and usage.

Personal Safety Measures

Personal protective measures and safe operating practices.

Power Tool Use and Care Best Practices

Band Saw Specific Safety Rules

Saw Blade Handling and Safety

Safety precautions when handling and using saw blades.

Workpiece Securing Techniques

Personal Safety for Band Saw Operation

Personal safety measures relevant to band saw operation.

Cutting Operations Procedures and Safety

Procedures and safety tips for the cutting process.

Electrical Information and Safety

Grounding Instructions for Safety

Proper grounding procedures to prevent electric shock.

Extension Cord Usage Guidelines

Understanding Your Band Saw Components

Assembly and Adjustment Procedures

Assembling the Band Saw Stand

Step-by-step guide to assembling the band saw stand.

Attaching the Band Saw Table

Instructions for attaching the table to the band saw.

Installing Accessory Tools

Installing Circle Cutting Guide Accessory

Adjusting the Table Tilt Angle

Adjusting Saw Blade Tracking

Steps for correctly tracking the saw blade on the wheels.

Setting Blade Tension Correctly

How to set the correct tension for the saw blade.

Adjusting Upper Blade Guide Bearings

Adjusting the upper blade guard and bearings for proper blade support.

Adjusting Lower Blade Guide Bearings

Adjusting the lower blade guide and bearings.

Changing Band Saw Cutting Speed

Procedure for Changing Saw Blade

Detailed instructions on how to replace the band saw blade.

Operating Your WEN Band Saw

Operation Warnings and Suggestions

Important safety tips and operational advice for using the saw.

Rip Fence Repositioning Guide

Using the Miter Gauge for Angled Cuts

Safe Use of the Push Stick

General Band Saw Cutting Practices

Cutting Curves with Circle Guide

Band Saw Maintenance Guide

Routine Pre-Operation Inspection

Cleaning and Storage Procedures

Exploded View and Parts List