UNPACKING & ASSEMBLY
No. Accessory Qty.
43 Foot Support Assembly 2
44 Foot Support Isolator 2
32 M6X25 Bolt 2
45 M6 Nut 2
64 M8 Nut 4
48 Wheel Axle 2
42 Wheel 2
16 Flat Washer 2
25 Cotter Pin 2
19 Handle 2
73 Handle Isolator 2
30 Handle Plug 2
67 Handle Bushing 4
31 M8X45 Bolt 2
77 M8 Lock Nut 2
N/A Spark Plug Wrench 1
N/A First Stage Regulator 1
N/A Oil Bottle 1
PACKING LIST
UNPACKING THE GENERATOR AND ACCESSORIES
Open the packaging and take out all loose parts from the box. With the help of a good friend or trustworthy
foe, carefully lift the generator from the packaging and place it on a sturdy, level surface.
Make sure all the accessories are accounted for and fully assemble the generator before discarding the pack-
aging. If any part is missing or broken, please contact our customer service at (800) 232-1195, M-F 8-5 CST
or email us at techsupport@wenproducts.com.
10
IMPORTANT: Two red shipping brackets have been added
to the bottom of your generator to protect the generator
during shipping. Please make sure to remove BOTH ship-
ping brackets before operation.
IMPORTANT: The LPG hose is packed underneath the fuel
tank, sitting above the engine. Remove to hose and set it
aside before assembling or operating the generator.
To Next Page
Loading...
