USING THE GENERATOR
SWITCHING FUELS
To maximize your generator's lifespan, we recommend re-
moving all loads from the generator before switching be-
tween gasoline and LPG. If this is not possible, reduce loads
as much as possible in order to ensure a smooth switch.
Your generator is rated to handle a higher load when run-
ning on gasoline than on LPG, so keep this in mind when
planning your fuel usage. To switch fuels:
1. Make sure you have enough gasoline or propane. If
switching to propane, make sure the propane regulator and
hose are securely attached to the propane cylinder and the
propane inlet on the generator, and that the propane cylin-
der valve is turned ON.
2. Turn the fuel selector switch (Fig. 18 - 1) to the desired
fuel source.
Fig. 18
1
30
To Next Page
Loading...
Need help?
General
