9
GENERATOR SAFETY WARNINGS
4. Allow generator to run for several minutes before
connecting electrical devices. Do not start or stop en-
gine with electrical devices plugged in to the receptacles.
Failure to do so could damage the generator and/or con-
nected electrical devices.
5. Do not turn on electrical devices until after they are
connected to the generator.
6. Generators vibrate in normal use. During and after
the use of the generator, inspect both the generator as
well as extension and power supply cords for damage
resulting from vibration.
7. Do not touch hot parts. This generator produces heat
when running. Temperatures near exhaust can exceed
150ºF (65ºC). Allow generator to cool down after use be-
fore touching engine or areas of the generator that be-
come hot during use.
8. Turn off all connected electrical devices before stop-
ping the generator.
9. Always turn generator off before refueling.
Allow generator to cool for at least 2 minutes before re-
moving fuel cap. Loosen cap slowly to relieve pressure
in tank.
10. Turn the engine switch to “STOP” position when
the engine is not running.
11. Empty fuel tank before storing or transporting the
generator. Do not store generator or gasoline near fur-
naces, water heaters, or any other appliances that pro-
duce heat or have automatic ignitions. Store the genera-
tor and fuel away from sparks, open flames, pilot lights,
heat and other sources of ignition.
12. Always wash hands after handling generator.
CAUTION: Misuse of this generator can damage it or
shorten its lifespan.
UNPACKING
With the help of a friend or trustworthy foe, such as one of your in-laws, carefully remove the generator from the
packaging and place it on a sturdy, flat surface. Make sure to take out all contents and accessories. Do not discard
the packaging until everything is removed. Check the packing list below to make sure you have all of the parts and
accessories. If any part is missing or broken, please contact customer service at 1-800-232-1195 (M-F 8-5 CST),
or email techsupport@wenproducts.com.
UNPACKING & PACKING LIST
DF875iX-HA36 High Altitude Kit ..................1
DF875iX-HA68 High Altitude Kit ..................1
Spark Plug Socket .......................................1
Screwdriver .................................................1
Wrenches ....................................................4
(19/17mm (2), 10/13mm, 8/10mm)
Generator .................................1
Handle ......................................1
Funnel ......................................1
User Manual .............................1
Box 1 of 2
Wheels .....................................2
LPG Regulator ..........................1
Hardware Bag (Box 2 of 2)
Wheel Assembly
Wheel Axle and Nut ..................2
Handle Assembly
Handle Bracket .........................1
M6x30 Bolt ..............................4
R-Clip and Handle Pin ..............1
Feet Assembly
Feet ..........................................2
M6x40 Bolt ..............................4
M6 Nut .....................................4
Tools & Accessories (Box 2 of 2)
Box 2 of 2
To Next Page
Loading...
Need help?
General
