SPECIFICATIONS
INTRODUCTION
Thanks for purchasing the WEN Scroll Saw. We know you are excited to put your tool to work, but first, please
take a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-800-232-1195.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your
careful attention and understanding. Always follow the safety precautions to reduce the risk of fire, electric shock
or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-
cident prevention measures.
3
Model Number LL2156
Motor 120V, 60 Hz, S1 1.2A, S2 30 min 1.6A
Speed 550 - 1600 SPM
Throat Depth 21 Inches
Maximum Workpiece Thickness
2 in. at 0°
3/4 in. at 45°
Blade Stroke 3/4 Inch
Table Bevel
0° - 45° Left, 0° - 30° Right
Table Size
25-5/8 in. x 16 in.
Blade Type
5 Inches, Pinless
Dust Port Adapter 1-1/2 in. Outer Diam., 1-5/16 in. Inner Diam.
Dimensions 36-1/2 in. x 16 in. x 17-3/4 in.
Weight 53.8 Pounds
To Next Page
Loading...
Need help?
General
