SPECIFICATIONS
INTRODUCTION
Thanks for purchasing the WEN Metal Lathe. We know you are excited to put your tool to work, but first, please
take a moment to read through the manual. Safe operation of this tool requires that you read and understand this
operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety
concerns, as well as helpful assembly and operating instructions for your tool.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual,
please visit wenproducts.com for the most up-to-date manual or contact our customer service at 1-847-429-9263.
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize
safety for both yourself and others.
Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your
careful attention and understanding. Always follow the safety precautions to reduce the risk of fire, electric shock
or personal injury. However, please note that these instructions and warnings are not substitutes for proper ac-
cident prevention measures.
Model Number ML712, ML716
Motor 110V, 60 Hz, 4A
Output Power 250W
Fuse Glass, 5x20mm, 4A, 250V (F4AL250V)
Chuck 80mm, 3 Jaws
Swing Over Bed 7 Inches (180mm)
Distance Between Centers
ML712: 12 Inches (300mm)
ML716: 16 Inches (400mm)
Spindle Bore 0.8 Inches (20mm)
Cross Slide Travel 2.5 Inches (65mm)
Compound Slide Travel 2.16 Inches (55mm)
Variable Speed 100 - 2500 RPM
Spindle Taper MT3
Tailstock Taper MT2
Minimum Longitudinal Feed Rate 0.004” (0.1mm) per rev.
Maximum Longitudinal Feed Rate 0.008” (0.2mm) per rev.
Screw Threads 12 - 52 TPI (18 Thread Pitches)
Product Weight
ML712: 79.4 Pounds
ML716: 92.6 Pounds
Product Dimensions
ML712: 27-3/4 in. x 11-1/2 in. x 12 in.
ML716: 31 in. x 11-1/2 in. x 12 in.
3
To Next Page
Loading...
Need help?
General
