Wen MM0713 - Page 25

EXPLODED VIEW & PARTS LIST
25
No. Part No. Description Qty.
0-01 MM0795-001 Motor assembly 1
0-02 MM0795-002 Pivot assembly 1
0-03 MM0795-003
Base&table
assembly
1
0-04 MM0795-004
Working clamping
assembly
1
0-05 MM0795-005
Blade guard
assembly
1
0-06 MM0795-006
Miter lock handle
assembly
1
0-07 MM0795-007
Bevle lock handle
assembly
1
0-08 MM0795-008 Arbor assembly 1
0-09 MM0795-009
Cross head screws
M5x16
2
0-10 MM0795-010 Inner flange 1
0-11 MM0795-011 Blade 1
0-12 MM0795-012 Outter flange 1
0-13 MM0795-013
Socket screws
M8(L)x16
1
0-14 MM0795-014 Screws M5x10 1
0-15 MM0795-015 Screws M5x12 1
No. Part No. Description Qty.
0-16 MM0795-016 Lock nut M6 1
0-17 MM0795-017 Screws 1
0-18 MM0795-018 Linkage 1
0-19 MM0795-019
Shoulder screws
M5x10
1
0-20 MM0795-020 Set screws M6x10 1
0-21 MM0795-021 Screws M5x10 1
0-22 MM0795-022 Lock pin 1
0-23 MM0795-023 C-Ring Ø10mm 1
0-24 MM0795-024 Lock nut M12 1
0-25 MM0795-025 Washer Ø22mm 2
0-26 MM0795-026
Wave washer
Ø22mm
1
0-27 MM0795-027 Dust bag 1
0-28 MM0795-028 Washer 1
0-29 MM0795-029 Pivot shaft 1
0-30 MM0795-030 Spring sleeve 1
0-31 MM0795-031 torsion spring 1
0-32 MM0795-032 Bevel scale 1
0-33 MM0795-033 Wave washer 1
MITER SAW
NOTE: Not all parts may be available for purchase. Parts and accessories that wear
down over the course of normal use are not covered under the warranty.