WePresent WiPG - Mirrorop Software Development

12
© wePresent 2017
NETWORK DEPLOYMENT USER GUIDE
4
Connecting to WiPG/WiCS Device
4.4 MirrorOp Software Development
Listed below are a few options for software deployments.
Guest Executable File
Users or the IT department can install the full MirrorOp (Sender) software directly from the admin
panel/web page of the WiPG/WiCS device. The option to download the quick executable
application (portable software) to launch MirrorOp is also available on the admin panel/web page.
Plug & Show USB
Click on the “Make PnS Token” icon on the standby screen to copy the MirrorOp (Sender)
executable le (protable software) to the attached USB drive. (Guest) users can launch the
MirrorOp executable le directly from the PnS token to connect to the target WiPG/WiCS device
Device Prole (.mop)
The WiPG/WiCS Device Prole (.mop) le provides a quick way to connect to a predened
wePresent. By dening the WiPG/WiCS Device Prole, a user can double click on the le and it will
connect his MirrorOp software to the predened WiPG/WiCS device automatically. In order for the
.mop le to recognized by your Operating System, the MirrorOp software needs to be installed!
From the wePresent’s IP based admin panel you can download the Device Prole (.mop). Y The
.mop le is a basic XML text le with the following template:
--------------------------------------------------------------------------------------------------------------------------
<?xml version=”1.0” encoding=”utf-8”?>
<Devices>
<MirrorOp>
<Device>
<Name>USERNAME</Name>
<Device_name>DEVICENAME</Device_name>
<IP>192.168.100.10</IP>
<LoginCode>1234</LoginCode>
</Device>
</MirrorOp>
</Devices>
--------------------------------------------------------------------------------------------------------------------------
NOTE: IT professionals can easily manipulate variables in the XML le to create additional .mop
les for other units.