WePresent WiPG - WiPG;WICS Customization; Admin Panel

14
© wePresent 2017
NETWORK DEPLOYMENT USER GUIDE
5
WiPG/WiCS Customization
Domain Name Service
DNS - Hostname
An common way to connect to a target wePresent is to manually input the wePresent’s IP address.
Because inputting an IP address can be confusing for some users, it is possible to register a
Hostname for each wePresent IP address within your network domain (DNS). This allows users to
input the wePresents HostName in MirrorOp, instead of the IP address.
5.1 Admin Panel
The WiPG/WiCS device can be customized and congured through the built-in web pages of
the device called the “admin panel”. Parameters such as device IP address, WebSlides settings,
centralized management, and WiPG/WiCS connected (display) devices are set under the admin
menu option. The default password is admin, which can be changed.
 System Status/Information Panel
(WiPG)
(WiCS)
5.2 Firewall Settings
The MirrorOp software communicates with the target WiPG/WiCS device passing through
network security systems such as rewalls. A set of rules need to be established so that trafc can
be ltered and passed through the rewall. The rewall administrator will be prompted by the
operating system to add a rule if a rule does not exist.
Port Table: The rewall administrator can allow or restrict certain data to be communicated from
the user to the WiPG/WiCS device using the port table.