○ Enables/Disables MASK Function.
● ALL Icon + “#” ► Button 3
○ Sets the number of exposures (minimum 2) to be made for the total sequence of masking
images. The same quantity must be set on each strobe used for the masking operation.
● SEQ# Icon + “#” ► Button 4
○ Sets the firing placeholder for the strobe in the sequence of (1-6) masking images.
Menu Screen #5
● MENU 5 ► Button 1
● Strobe Master Lock Icon ► Button 2
○ Locks the on-strobe settings and disables the ability to change strobe settings via the
trigger allowing only flash synchronization.
● DELAY Icon ► Button 3
○ Enables/Disables flash delay by the amount set with Button 4.
● “#” ► Button 4
○ Rotate the command dial to set the time delay between 0.0 and 30.0 seconds.
Menu Screen #6
Access Menu Screen #6 by long-pressing Button 1 on any menu screen.
● MENU 6 ► Button 1
● SET Icon ► Button 2
○ Toggles the available settings of the green highlighted menu selection.
■ [Screen] can be set to three levels; [MAX, MID and MIN].
■ [Auto-off] can be set to three durations; [OFF, 15,30, or 60].
■ [M/TTL] can be set to two settings; [OFF, ON].
■ [Factory Setting] has two options; [YES, NO].
● SELECT Icon ► Button 3
○ Toggles through the menu items.
To Next Page
Loading...
