Contents
Contents 1
Introduction 3
Components (Included) 3
Important things to know before starting… 4
Reviewing Firmware Files 4
TTL ±3 Flash Exposure Compensation (FJ400 & FJ-X2m) 4
Canon Continuous Mode 4
FJ400 Strobe: Overview 5
FJ400 Strobe: LCD Display & Menus 6
FJ400 Strobe: Warnings 7
FJ400 Strobe: Firmware Updates 8
Installing the Firmware 8
FJ400 Strobe: Getting Started 9
Charging the FJ400 AC/DC Lithium Polymer Battery 9
Attaching the FJ400 AC/DC Lithium Polymer Battery 9
Removing the FJ400 AC/DC Lithium Polymer Battery 9
AC Power Operation 9
DC Power Operation 9
FJ400 Strobe: Mounting 10
Mounting to a Light Stand 10
FJ400 Strobe: Attaching & Removing Modifiers 10
Connecting a Bowens Speedring & Modifier 10
Removing a Bowens Speedring & Modifier 10
Attaching an Umbrella-Based Modifier 10
Removing an Umbrella Based Modifier 10
FJ400 Strobe: Wireless Control 11
FJ400 Strobe: Exposure Modes 11
Enabling ‘TTL’ Mode Operation [Requires FJ2-Xm Trigger, FJ80 Speedlight or compatible trigger] 11
Enabling ‘Manual’ Mode Operation 11
FJ400 Strobe: SYNC Functions 12
Enabling ‘Normal’ Sync 12
Enabling ‘HSS (High-speed Sync)’ 12
Enabling ‘Freeze Sync’ 12
Freeze Sync Flash Durations 12
To Next Page
Loading...
