Front Oil Seal Replacement
1.
Remove the front oil seal.
2.
Press-fit the new front oil seal.
CAUTION
Apply a thin coat
of
engine oil
to
the circumference and lip of the oil seal.
Governor Shaft Bushings' Replacement
1.
Remove the expansion plug and draw the bush-
ings out.
2.
Press-fit the new bushings into positions shown in
the figure at right.
Governor System Inspection
Check the governor system parts. If any parts are
found defective, repair
or
replace them.
Westerbeke Engines
36
To
be
flush with
this
plane
To
be
in contact
with
bottom
Press·
fitting
Governor
Shaft
Bushing
Check springs
for fatigue.
Check shaft
for
flaws.
Check sliding sleeve
joint for wear and damage.
Check weight
for
wear and damage.
To Next Page
Loading...
Need help?
General
