Westerbeke 20B TWO Tehnical Manual

Timing Gears' Installation
1. Press-fit the crankshaft gear onto the shaft.
2. Press-fit the valve camshaft gear and injection
pump camshaft gear onto
the respective shafts.
3. Install the gears in the following sequence.
a. Turn the crankshaft to set the No. 1 cylinder to
top
dead center on compression stroke.
b. Install the valve camshaft and injection pump
camshaft.
c. Install the idle gear so that timing marks on it are
in alignment with marks on the other gears.
d. Confirm that timing gears are in alignment with
each other.
Westerbeke Engines
Idler Gear
(Note timing marks1&2)
40

Westerbeke 20B TWO Specifications

General

Brand	Westerbeke
Model	20B TWO
Category	Engine
Language	English