Lit. No. 49513, Rev. 00 47 August 15, 2011
OPERATING YOUR SNOWPLOW
Function Description of Operation
L
(Angle
Left)
With wings in a straight line, move the
control lever straight to the left to move
both wings to the angle left position to
cast snow to the driver's left side. The left
wing retracts while the right wing extends.
Function times out after 3.25 seconds.
R
(Angle
Right)
With wings in a straight line, move the
control lever straight to the right to move
both wings to the angle right position
to cast snow to the driver's right side.
The right wing retracts while the left
wing extends. Function times out after
3.25 seconds.
Scoop/Retract Blade Position
Moving the control lever from the center position
toward the word SCOOP or RETRACT on the face
of the control body will cause both wings to move
at the same time into the following blade positions.
Function Description of Operation
SCOOP
Move the control lever toward the word
SCOOP on the control face to extend both
wings forward into the scoop position.
Function times out after 5.5 seconds.
RETRACT
Move the control lever toward the
word RETRACT on the control face to
draw both wings into the fully retracted
(vee) position. Function times out after
4.5 seconds.
To Next Page
Loading...
