iGen2500 and iPro2500
IGNITION COIL RETROFIT GUIDE
Have Questions? Call 855-944-3571 or email info@wpowereq.com
This comprehensive retrot guide is for replacing the ignition coil on
Westinghouse’s iGen2500 and iPro2500 inverter generators. The purpose
of this retrot is to limit the overspeed of the engine. This will eliminate
overheating issues due to engine overspeed.
Instructional videos for how to properly replace the ignition coil
are available at the links below:
Extended video: www.wpowereq.com/retrot-full
Quick video: www.wpowereq.com/retrot
Owners manuals with parts drawings for these inverters are available at
www.wpowereq.com
Tools recommended for this retrot:
• Flat head screwdriver
• Electric drill
• Screw driver bit extension
• Phillips screwdriver bit for drill
• 10mm socket for drill
• 8mm socket for drill
Ignition Coil
To Next Page
