What to do if Westinghouse iGen2550DFc engine runs rough?
If your Westinghouse Portable Generator engine runs roughly or bogs when a load is applied, it could be due to: * A dirty air filter, so clean it. * The generator being overloaded, so unplug some devices. * A faulty power tool or appliance, so replace or repair the tool or appliance, then stop and restart the engine.
How to fix a Westinghouse Portable Generator that lacks power?
If your Westinghouse Portable Generator lacks power, it might be because: * The air filter is restricted, so clean or replace it. * The gasoline is stale, the generator was stored without treating or draining gasoline, or it was refueled with bad gasoline, so drain the fuel tank and refuel with fresh gasoline.
What to do if my Westinghouse iGen2550DFc Portable Generator starts, then shuts down?
If your Westinghouse Portable Generator starts and then shuts down, it could be due to: * Low or depleted fuel level, so refuel it. * Incorrect engine oil level, so check it. * Dirty air filter, so clean it. * Contaminated gasoline, so drain the fuel tank and refuel with fresh gasoline.
Why is there no power at the AC receptacles of my Westinghouse Portable Generator?
If there's no power at the AC receptacles of your Westinghouse Portable Generator, it could be due to: * The OUTPUT READY LED being OFF and the OVERLOAD LED being ON, so check the AC load and restart the engine. * The AC circuit breaker/s being tripped, so check the AC loads and reset the circuit breaker/s. * A faulty power tool or appliance, so replace or repair the tool or appliance, then stop and restart the engine.
General| Running Wattage | 2200 Watts |
|---|---|
| Fuel Type | Gasoline |
| Engine Type | 4-Stroke OHV |
| Run Time at 50% Load | 10 Hours |
| Run Time at 25% Load | 12 Hours |
| Weight | 48 lbs |
| Noise Level | 52 dBA |
| AC Output | 120V |
| Outlets | 1 x 12V DC |
| Starting System | Recoil |
| DC Output | 12V |
| Type | Portable Inverter Generator |
Instructions for registering the product for warranty coverage.
Information on how to obtain the latest user manual.
Legal statements regarding manual content, illustrations, and rights.
Detailed technical specifications and ratings for the generator.
Explanation of safety terms (DANGER, WARNING, CAUTION, NOTICE) and symbols.
Critical safety guidelines for operating the generator, including CO hazards.
Specific safety measures for handling gasoline and preventing fires/explosions.
Safety requirements and precautions for using propane cylinders.
Understanding the generator's CO sensor status lights for safety.
Understanding generator wattage, managing electrical loads, and preventing overload.
Guidelines for selecting and using appropriate extension cords safely.
Identification and description of key parts of the generator.
Explanation of the generator's control panel layout and indicators.
Instructions for removing and inspecting carton contents.
General description of the generator's purpose and capabilities.
Guidelines for safely locating and operating the generator in various conditions.
Procedure for checking and filling the engine oil level before operation.
Proper fuel types and procedures for adding gasoline to the generator.
Steps for safely connecting a propane cylinder to the generator.
How to switch between fuel sources and start the engine.
Procedures for safely stopping the generator and using ECO mode.
Guidelines for safely transporting and cleaning the generator.
Procedure for cleaning or replacing the air filter for optimal performance.
Steps for draining and refilling the engine oil.
Instructions for cleaning/replacing the spark plug and spark arrestor.
Procedures for draining the fuel tank and carburetor float bowl.
Checking and adjusting the valve clearance for engine performance.
Troubleshooting guide for common issues like starting problems, lack of power, and rough running.
To Next Page
