SERVO FREQUENCY
When using the digital servo, adjust the receiver output frequency to match the operating
frequency of the servo to better play the servo performance.
Interface path:HOME/MON.→ [LINKAGE SETTING] → [SERVO FREQUENCY]
Adjust the output frequency of the receiver, the stroke is 50Hz~300Hz, and the setting is
successful when exiting
41
LINKAGE SETTING
This function requires servo
support and requires the
transmitter and receiver to be in normal
communication state for the settings to be effective!
The system defaults to 50Hz. Do not change the
servo frequency parameters at random. Otherwise
there is the possibility of damage to the servo!
To Next Page
Loading...