28
8 Flap trim
●Function
●Settings
This feature is for 6 channels to do the trim stick action.
Press the power key to boot into the "parameter item.
settings" menu, use Up / Down keys to select the 2. Selected the options, press the + / - key to edit the
"Flap trim", press OK key to enter the function data. Long press OK key to restore the default
interface, as above. The steps of settings is as values.
follows: 3. Set successfully, press EXIT key to return.
1. Using the up / down keys can choose to the edit
9 Aileron diff control
●Function
●Settings
This feature is used in have two aileron servo, you can create the differential aileron movement.
Press the power button to boot into the "parameter 1. Use the up / down key to select the Edit Item
settings" menu,use Up / Down keys to select the 2. Selected the options, press the + / - key to edit the
"Aileron diff control", press OK key to enter the data. Long press OK kry to restore the default value.
function interface, as above. The step of settings 3. Set successfully, press EXIT key to return.
is as follows:
10 Ele-Flap Mixing
●Function
●Settings
This feature is to make the flap, elevator doing the make the stunt movement more fluid . K2 controls
corresponding action. Flap down, elevator up, the switch.
Press the power button to boot into the 1. Using the up / down keys to choose the edit item.
"Parameter setting" menu, use Up / Down keys to 2. Selected the options, press the + / - key to edit the
select the "Ele-flap mixing", press OK key to enter data. Long press OK key to restore the default
the function interface. As above. values.
The step of settings is as follows: 4. Set successfully, press EXIT key to return.
INSTRUCTION MANUAL
WFT07 REMOTE CONTROL DEVICE
Airplane Function
To Next Page
Loading...
