16
Grip Lever Operation
Button initial setting is the timer operation button.
Operation mode is divided into:
1, the standard, press down is effective bounce is invalid;
2, switch, each time you press will switch the state of ON/OFF .
The Adjustment Method Of Mechanical Range
In accordance with the user's operation feeling, when you want to
reduce/enlarge the trigger. Braking travel, please adjust this
place.
Adjustment method:
6 angle screwdriver rotation diagrams of using the 2.5mm screws,
adjust The trigger brake travel.
Clockwise rotating screw, travel becomes small, please adjust.
when you observe .
Matters need to attention
After Adjusting the machinery range it must use the throttle
calibration function. (see page fifty-second)
Adjust
change the steering wheel And trigger tightness.
Adjustment method:
Use 1.5mm 6 angle screwdriver rotate the screw, adjust the
steering wheel
And the spring strength to pull the trigger.
Clockwise rotation, the traction force will be stronger .
Matters need to attention:
When the anti clockwise rotate beyond the limit the screw will be
fall off.
the strength of steering wheel and the trigger spring, to
Adjustment Method Of Wheel/trigger Tightness.
The runner tightness
regulating hole
The trigger for
adjusting tightness
Adjustment Method Of Trigger Position
You can move the trigger position.
Adjustment method:
6 angle screwdriver 2.5mm rotating the screw, adjust the trigger
position.Clockwise rotation adjustment is far away from the
handle.
Terms Of Use
To Next Page
Loading...
