Wfly X4 - Model Information [MODEL]

Model Information[MODEL]
The X4 transmitter can store 40 sets of model data
This menu selection, copy, reset model. And can set the name of the model .
Model Selection
Model Replication
Can Selected the currently model data copy to another model data, do not to change the
current model data Setting. This can be a simple setting only subtle difference for the
model.
Set: Main Menu → MODEL→ COPY
Model Name
Set: Main Menu → MODEL→ ODELM
40 sets of model can store and select.
Factory Setting
To distinguish the difference of each model group, can use English letters, Numbers and
punctuation naming your model!
Set: Main Menu → MODEL→ NAME
Reset the current model parameter, reset value to factory settings.
(only for the current model data! )
51
Case: (from) M01 model group (group M02 model to copy)!
Set: Main Menu → MODEL→RESET
Function Description