28
Red On
Blue On
Blue Blinking Fastly
Blue&Red Blinking Slowly
Blue Blinking Slowly
RF ON
RF OFF
Advanced Function ON
Low Voltage
Coding
Power switch: push to the end point is the power off ,
push the end point of PWR ON is the normal boot ,
push the DISP ON is the emission function boot off.
Throttle trigger: pull the trigger is accelerated; push forward to the trigger is the brake or reverse.
The steering wheel: back to turn left; move to turn right.
Menu: import menu, press reset.
Return: return (and save).
Roller / Confirm: adjust up and down, enter the menu, sure to save.
Digital trim 1 (Dt1): can be customized function, step, default to the direction of fine adjustment.
Digital trim 2 (Dt2): can be customized function, step, the default for the throttle trim.
Digital trim 3 (Dt3): can be customized function, step, the default channel 3.
Digital trim 4 (Dt4): can be customized function, step, the default adjustment for the size of the action.
Slide switch (Sw2): can be customized functions, the default channel 4; three gears.
Button (SW1): the switch of functional state Can be customized functions, switching mode, the default
for the timer switch button.
Power Switch
Throttle trigger
Steering Wheel
Menu
Return
Roller / Confirm
Digital Trim 1
Digital Trim 2
Digital Trim 3
Digital Trim 4
Slide Switch
Button
Terms Of Use
Switch, Button Description
The General Mode Of Operation
1, press the [Menu] to enter the menu.
2, rolling[Roller], select the menu or edit items.
3, press [Confirm] enter edit state.
4, [Roller] rolling adjusting parameters.
5, after setting up press [Return] / [Menu] exit and save.
Description Of Indicator Lamps
To Next Page
Loading...
