Wfly X4 - Primary Setting

Positive And Negative Setting [REV]
Aiming at the throttle, direction, channel 3, channel 4, change the movement direction
of servo , each channel independently set.
Note:
Please Set The Positive And Negative According To The Actual Direction Of
The Model Car!
Digital Trimming[TRIM]
Make the throttle, direction, channel 3, channel 4 of neutral point
amount of motion give compensation.
Will Not Affect The Total Stroke.
Auxiliary Tuning[SUBTR]
fix the neutral position of throttle , direction ,channel3 channel 4 .
When the model car midpoint deflection,
which will cause unable to walk straight.
Use This Function To Correct!
-2
0%
+20%
Primary Setting [PRIMARY]
38
Set: Main Menu → PRIMARY → TRIM
Set: Main Menu → PRIMARY → SUBTR
+20% initial value
Midpoint
CH1
100% of
the tot
al lift
100% of
the total li
ft
Set: Main Menu → PRIMARY → EVR
Function Description