Methods
18
This structure lack of a steering rocker arm,
The steering wheel is directly installed on the main body, simple and flexible!
Another operating options available for different operating habits of users!
①
②
Pay attention to the direction wheel part of unloading screw. when the screw is
disassembly
The positive one, first from the direction wheel frame unloading inner six angle screws,
remove the steering wheel;
Two, remove three screws of the direction of the wheel seat.
Pull out the data cable plug,
make data lines through the internal machinery.
Remove the steering wheel arm and a round cover;
①
②
Adjust the steering wheel seat and a round cover position, plug the cable, mounted on
the inner six angle screw;
Screw unloading methods as the first step,fix the inner six angle screw .
③
①
Left And Right Hand Replacement Of The
Steering Wheel Assembly
Terms Of Use
To Next Page
Loading...
