EasyManua.ls Logo

Whirlpool Coolerator - Using your dehumidifier; To operate

Whirlpool Coolerator
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using your dehumidifier
You will use your dehumidifier more during months when you’re not heating
your home. However, your dehumidifier can help prevent excessive moisture
and keep you comfortable all year in any area of your home.
Use in a basement to help
prevent moisture damage
Use in cooking, laundry,
bathing and dishwashing
areas which have excess
moisture.
Use to prevent moisture
damage anywhere books or
valuables are stored.
NOTE: Do not operate your dehumidifier in temperatures below 65°F (18.3”C). The coil may
become iced over at low temperatures and unit will not operate properly.
Your dehumidifier has a PAN FULL Light. The light glows when the pan is full of water to
indicate that it needs emptying.
To operate:
PAN FULL LIGHT
HUMIDISTAT
PAN FULL
HUMIDISTAT
0
OFF
DRYEST
: 1
PAN FULL
HUMIDISTAT
0
Off
DRYEST
1. Turn Humidistat Control to OFF, then
plug in the dehumidifier.
2. Your dehumidifier has an automatic
humidistat. Turn the Humidistat Control
clockwise toward DRYEST for normal opera-
tion. Adjust later, if necessary.
When humidity in the room increases, the
dehumidifier automatically starts. When the
humidity decreases to the selected level, the
dehumidifier automatically stops.
Continued on next page
5

Related product manuals