4-21
3. Close the oven door as far as the pins will
allow, and make sure that the hinge hang-
ers are fully seated on the support pins. If
they are not seated properly, the door will
not close tightly and may be off-center. To
seat the hinge hangers, open the door
slightly, and push in on the bottom until the
hangers are fully seated.
4. Open the oven door to its fully open posi-
tion and remove the two hinge hanger
pins.
5. Install the two door stop clips in the top of
the door slots with the angled side facing
up.
Angled Side up
6. Close the oven door completely and check
it for proper operation and alignment.
To Next Page
Loading...
