Whirlpool LSA 1300 - RID#1 Main Function Descriptions

RID#1 Main Function
RID#1 .1 LOAD SENSING
Load Sensing Animation
1) Decides the
Required W
a)
Evaluates
b) P1 (
Daily Wash
this
Load sensing
c)
Finalize
between
d)
Indication for Load sensing is by means of
RID#1 .2 BALANCE SPIN
1) Used to D
istribute
2) Unbalance(Ub)
checking Point:
a)
During S
if the Off balance threshold value gets crossed within a specified tenure
then
control move
b)
Self Correction process will be processed once while detecting “Ub” for
the first time in a wash cycle.
c)
During Self Correction p
be distributed by means of specified Wash Strokes.
RID#1 .3 KEY LOCK
1) In order to lock
the Keys
that Keys will get
Lock
2) Key lock can be
invoke
3)
There will be no response for any key press while the system remains in Key Lock
mode and the corresponding LED will blink 5 times.
4)
In order to unlock, Press
5)
During Errors, Keylock feature will get disabled
depending on the type of Errors.
RID#1 .4 6
th
SENSE
1) 6
th
Sense LED will be t
Water level program 6
2) 6
th
Sense LED will go to Off whenever Error pops up durin Auto Water Level
Program.
CONTROL COMPONENTS
AND SPECIFICATION
Load Sensing Animation
Required W
ater level with respect
to the Mass of Cloth Load
Evaluates
the water level with dry laundry at the of
wash
Daily Wash
), P4 (Easy Iron), P6(Bed linen), P8
(C
Load sensing
process
Finalize
the water level by slot sensor
output data during
between
30-150 rpm
Indication for Load sensing is by means of
“Auto”
Water level LED.
istribute
the Unbalanced Cloth Load.
checking Point:
During S
IS, if the system fails to attain 50 to 150 R
if the Off balance threshold value gets crossed within a specified tenure
control move
s to Ub error
Self Correction process will be processed once while detecting “Ub” for
the first time in a wash cycle.
During Self Correction p
rocess, W
ater will be filled & the cloth load will
be distributed by means of specified Wash Strokes.
the Keys
, Press Delay End and Extra R
inse key simultaneously
Lock
ed & the corresponding
LED will start glowing.
invoke
d only when the system is in running mode
There will be no response for any key press while the system remains in Key Lock
mode and the corresponding LED will blink 5 times.
In order to unlock, Press
Delay End and Extra R
inse key simultaneously
During Errors, Keylock feature will get disabled
for Power & start/pause key
depending on the type of Errors.
Sense LED will be t
urned ON whenever Load sensing
happens
Water level program 6
th
Sense LED will be Turned ON.
Sense LED will go to Off whenever Error pops up durin Auto Water Level
AND SPECIFICATION
SERVICE MANUAL
Page | 25
to the Mass of Cloth Load
wash
process
(C
olors) will follow
output data during
60 sec of sensing
Water level LED.
IS, if the system fails to attain 50 to 150 R
pm / 150 to 300 Rpm /
if the Off balance threshold value gets crossed within a specified tenure
Self Correction process will be processed once while detecting “Ub” for
ater will be filled & the cloth load will
be distributed by means of specified Wash Strokes.
inse key simultaneously
so
LED will start glowing.
d only when the system is in running mode
.
There will be no response for any key press while the system remains in Key Lock
inse key simultaneously
for Power & start/pause key
happens
i.e For Auto
Sense LED will go to Off whenever Error pops up durin Auto Water Level