Whirlpool WHESFC - Installation Instructions; Typical Installation

8
Installation Instructions
TYPICAL INSTALLATION
FIG. 9
NOTE: See “Air Gap Requirements” section.
NOTE: Water Conditioner shown with Salt Lid
and Top Cover removed
Inlet
Outlet
Clips
Pipe
To Outside
Faucets
1” NPT Sweat
Adaptor (not
included)
O-ring
Single
Bypass Valve
Lubricated
O-ring
Conditioned
Water
Hard Water
Main Water Pipe
Water Conditioner
Valve
Valve Drain
Elbow
Valve Drain
Hose*
*Do not connect the
water conditioner valve
drain tubing to the salt
storage tank overflow hose.
Floor Drain
Overflow
Drain Elbow
Salt Storage
Tank Overflow
Hose*
Secure Valve Drain Hose
in place over Floor Drain
1” NPT
Threaded
Adaptor
1-1/2”
air gap
Dimensions
FIG. 8
39-1/2”
47-7/8”
3-3/4”
41-1/2”
OUT
IN
18”
19”
IN – OUT
Plug-in
Power
Supply
To
Controller