Whirlpool WOS51EC0H - Accessing the Microwave Appliance Manager

COMPONENT ACCESS
Whirlpool
®
Smart Wall Ovens

4-3
Accessing the Microwave Appliance Manager
1. Remove ¼" (6.4 mm) hex-head screws for the top panels;
three (3) on each side and four (4) on the back.
NOTE: The clamp around the power harness conduit may
need to be removed to access one of the rear ¼" (6.4 mm)
screws.
2.
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before operating.
WARNING
Excessive Weight Hazard
Use two or more people to move and install oven.
Failure to do so can result in back or other injury.
Back to Table of Contents