Cover Sheet
Whirlwind
Model 216 Pneumatic
Cut-Off
Saw
============================================================================
Before
we
get started, we would like
to
thank you for your purchase
of
a Whirlwind Model 216 Cut-
Off
Saw
. We realize we have a lot
of
competition out there and we truly appreciate your business.
In
preparing this manual we've tried to provide the answers to
most
problems that might arise.
However, if we've missed something, please give
us
a call. You should also
be
aware that
an
operator's manual has been provided with the machine.
We
encourage you to have each
and
every
operator spend a few minutes to become familiar with
it.
This machine, like every Whirlwind, was tested under power for 4-5 hours prior to shipment.
Nothing but the best components and raw materials were used
in
its construction. Like any quality
tool,
it
must
be
properly maintained to perform at its best. The operator's manual gives instructions
on
a few pre-operational tests. These tests should
be
performed at the beginning of each shift. If any
malfunction
is
noted, it should be corrected immediately.
Numerous safety devices are installed
on
this machine for the protection
of
your operators.
These
devices
must
not
be removed
or
tampered
with.
CAUTION: NEVER PUT FINGERS UNDER GUARD I CLAMP.
Again, we would like to thank you and welcome you to the large family
of
Whirlwind customers.
We'
re
confident you'll be impressed with our products and our service. With proper maintenance,
your Whirlwind Model 216 should provide many years
of
excellent service.
For your records, please fill in the followi
ng
informati
on
:
Date
machine purchased
________
_
Seri
al
number
-----------
Model number - 216
Page 02
R081303
To Next Page
Loading...
