Need help?Do you have a question about the White 2137 and is the answer not in the manual?
General| Brand | White |
|---|---|
| Model | 2137 |
| Category | Sewing Machine |
| Language | English |
Identifies and lists the front-facing components and controls of the sewing machine.
Identifies and lists the rear-facing components and controls of the sewing machine.
A chart correlating fabric types with appropriate needle and thread choices for optimal stitching.
Details the correct procedure for inserting the sewing machine needle into the needle clamp.
Guidance on placing the spool, threading, and preparing the bobbin for winding.
Detailed instructions on how to thread the bobbin case with thread correctly.
Explains the procedure for correctly placing the threaded bobbin case into the shuttle.
Describes the complete path for threading the sewing machine with a single needle.
Outlines the specific steps for threading the machine when using twin needles.
Instructions for replacing the presser foot and needle plate for straight stitch sewing.
How to use the stitch length dial to adjust stitch size for various sewing needs.
Explains how to activate the reverse sewing function for tying off seams.
Guide to adjusting upper thread and bobbin case tensions for balanced stitches.
How to set pressure and feed for standard sewing and embroidery tasks.
Steps to prepare the machine for darning and free-hand embroidery by adjusting feed and pressure.
Essential checks and steps to perform before starting any sewing operation.
Instructions on how to safely remove finished work from the sewing machine.
How to adjust the zigzag lever and width locks for desired stitch patterns.
Guidance on setting up the machine for satin stitch and general embroidery work.
Demonstrates various stitch width and lever movements to create decorative embroidery patterns.
Instructions and techniques for sewing with twin needles to create decorative patterns.
How to use an embroidery hoop for free-hand designs and monograms.
Detailed guide on how to sew buttonholes using the sewing machine.
Instructions for attaching buttons securely to fabric using the sewing machine.
How to create neat hems on various fabrics using the zigzag stitch.
Guide on using the narrow hemmer accessory for creating uniform hems.
Steps for creating a French seam for a clean finish on raw edges.
Instructions for creating a flat felled seam for durable and neat finishes.
Technique for achieving a delicate, hand-rolled edge finish using the machine.
How to use the quilting guide for creating parallel stitching lines.
Guide on attaching and using the seam gauge for consistent seam allowances.
Instructions on where and how to oil the sewing machine for optimal performance.
Detailed instructions for replacing the drive belt of the sewing machine.
Procedures for cleaning and reassembling the shuttle mechanism for smooth operation.
Solutions for common issues causing upper thread breakage during sewing.
Solutions for common issues causing lower thread breakage during sewing.
Solutions for common issues leading to needle breakage while sewing.
Common causes and remedies for skipped stitches in sewing.
Ways to fix problems where stitches are looping on the fabric surface.
Solutions for issues causing the machine to bind or operate stiffly.
To Next Page
