7
Installation and Operation
BASIC INSTALLATION OF YOUR APPLIANCE
NOTE: Always place the Ice Cream Maker upright on a flat, level and solid surface.
1. Make sure that the cooling cylinder is clean and free of
foreign objects.
2. Install the removable mixing bowl. Make sure the out-
side of the mixing bowl is completely dry.
3. Make sure that the handle of the removable mixing bowl is tucked next to the groove in the rubber seal. Some-
times the handle bar of the freezing bowl may be sticking out or the arm of the bowl is resting on the plastic seal
causing churn motor not to work.
5. Insert churn motor properly into the churn motor plug
and mixing paddle.
6. Once the churn motor is installed, your portable ice
cream maker is ready for use.
Cooling Cylinder
Rubber Seal
Handle Bar
To Next Page
Loading...
Need help?
General
