02 - RIDE INFO 2.1 Out the Box
When unboxing your new Whyte eBike you will nd a Whyte Charger Case
containing numerous manuals (Including this manual). Please ensure you
read all relevant literature prior to assembly or riding your eBike. Relevant
manufacturer manuals for your eBikes components will be provided. Ensure
all documents are retained for assistance with maintenance, cleaning, and
warranty.
In addition to your charger case there will be an accessories box containing
components that are specic to your eBike. Follow the instructions below or
please contact your Whyte retailer for any support required.
Please note: the Whyte charger box and accessories box will differ between
bike models and may not reect the illustrations in this manual.
9
Tools Required
• 15mm Spanner
• Philips Head Screwdriver
Accessory Part Instructions:
In the bicycle accessories kit you will nd numerous components relevant
to your bicycle. If your bicycle is supplied with pedals you will need a 15mm
spanner to t them to the cranks. Ensure you have identied the right and
left pedal prior to installation. Tighten pedals to a recommended 40.2-42.9
Nm (350-380 lb/in). A Philips screw driver is required to mount reectors
to your bicycle. Reectors are a crucial part of the safety system and must
not be removed. Before riding your Whyte eBike please inform yourself of all
applicable legal requirements to ride safely in your country/state.
To Next Page
Loading...
