25WIKA operating instructions, model CPG1500
EN
14161966.06 03/2024 EN/DE
1. Lay the instrument face down.
2. Loosen the three screws of the battery compartment, see Fig. 1 “Position of the
battery compartment”.
3. Remove the battery cover.
4. Insert three AA-sized batteries.
▶
Make sure that the polarity, (+) or (-), on the batteries matches the markings in the
battery compartment.
▶
Do not use damaged batteries and follow the battery manufacturer's instructions.
5. Put the battery cover on and screw it tight with the three screws.
▶
Maximum tightening torque of the screws is < 0.4 Nm.
Fig. 1 - Position of the battery compartment
5. Commissioning, operation
To Next Page
Loading...
