WIL-10183-E-04 11
P4 Clamped Metal
SECTION 5
P4 METAL SUCTION-
LIFT CAPABILITY
Suction-lift curves are calibrated for
pumps operating at 305 m (1,000') above
sea level. This chart is meant to be a
guide only. There are many variables
that can affect your pump's operating
characteristics. The number of intake
and discharge elbows, viscosity of
pumping fluid, elevation (atmospheric
pressure) and pipe friction loss all affect
the amount of suction lift your pump will
attain.
SUCTION LIFT CAPABILITY
To Next Page
Loading...
