*See elastomer chart - Section 9
2
Metal Center Block Assembly includes items 13, 14 and 16. All boldface items are primary wear parts.
1
Air Valve Assembly includes items 2 and 3
.
.
3
Plastic Center Block Assembly includes items 10, 13, 14 and 16
.
.
Exploded View and Parts List
Air Distribution Components
Air Valve Assembly, Pro-Flo® SHIFT 1
O-Ring, End Cap (-225, Ø1.859" x Ø.139")
Screw, SHC, Air Valve (1/4"-20 x 4-1/2")
Screw, SHC, Air Valve (1/4"-20 x 4-1/2")
Muffler Plate, Pro-Flo® SHIFT
Gasket, Muffler Plate, Pro-Flo® SHIFT
Gasket, Air Valve, Pro-Flo® SHIFT
Center Block Assembly, Pro-Flo® SHIFT 2,3
Sleeve, Threaded, Center Block
O-Ring, Pilot Spool Retaining (-009, Ø.208" x Ø.070")
Gasket, Center Block Pro-Flo® SHIFT
O-Ring, (-210, Ø.734" x Ø.139")
O-Ring, Air Control Spool Retaining (-114, Ø.612" x Ø.103")
Screw, HHC (3/8"-16 x 1-1/8")
Screw, HHC (3/8"-16 x 1")
Washer, Flat (Ø.406" x Ø.812" x .065")
Grounding Screw, (10-32 x 1/2") Self Tapping
Bushing, Reducer 1-1/2" MNPT to 1" FNPT
Manifold, Discharge (NPT)
Manifold, Discharge (BSPT)
Manifold, Discharge (TRI-CLAMP)
Manifold, Footed Inlet (NPT)
Manifold, Footed Inlet (BSPT)
Manifold, Footed Inlet (TRI-CLAMP)
Large Clamp Band Assembly
Screw, HHC Large (1/2"-13 x 3-1/2")
Washer, Brass Flat (Ø.516" x Ø.875" x .063") (Not Shown)
Small Clamp Band Assembly
Screw, HHC Small (3/8"-16 x 2-1/4")
Washer, Brass Flat (Ø.392" x Ø.875" x .063") (Not Shown)
Gaskets/Valve Balls/Valve Seats/Valve O-Rings
O-Ring, Valve Seat PTFE-Fitted (-342, Ø3.600" x Ø.210") (Not
Shown)
Full-Stroke Rubber/TPE/PTFE Components
Washer, Inner Piston Backup
Screw, HHC (3/8"-16 x 1-1/8")
Screw, HHC (3/8"-16 x 1")
Washer (Ø.406" x Ø.812" x .065")