Wilo PBI-L203MA - Page 22

22
운운·운운운운 운운운운
PARAMETER FUNTOIN MENU
3. Warming-up time change
How to change warming-up time.
“0” Blinking.
Display Range 000~999
Initial setting value 60
Time unit minute
Press auto is move.
Press “+” or “-” can change status.
Press “Auto” is save and stop blinking.
Press “Stop” is move to stop status.
4. Sensor Offset change
How to change sensor offset.
“0” Blinking.
Display Range -0.9 ~ 0.9
Initial setting value 0
Pressure unit bar
Press auto is move.
Press “+” or “-” can change status.
Press “Auto” is save and stop blinking.
Press “Stop” is move to stop status.