Wilo Stratos-D Series User Manual

English
78 WILO SE 10/2013
• Menu of IF Modules with bus function:
LC display Setting
Signal for the building management system (BMS)
"Id" (Identification number) appears on connected
IF Modules with serial digital interface (not with
PLR), for sending a signal to the building manage-
ment system (for servicing or for commissioning
the building automation (BA)).
If the control button is turned, the Id
indicator flashes
The Id signal is sent to the building
management system.
The display opens the next menu.
If no signal is output, the control button can be
turned until the Id indicator no longer flashes.
Pressing the button opens the next menu on the
display
Setting the bus address
"OFF": bus communication is switched off
appears on the display indicating
communication via serial data interface.
Turn the control button to select a BUS
address (e.g. 64).
The address range depends on the bus
system used (see corresponding Instal-
lation and operating instructions)
The setting is applied
The display opens the next menu

Wilo Stratos-D Series Specifications

General

Application	Heating
Connection Type	Flange connection
Fluid Temperature Range	-10 °C to +120 °C
EEI	≤ 0.20
Display	LCD
Power Consumption	Varies depending on model
Housing Material	Cast iron
Motor Type	EC motor
Energy Efficiency Class	A