Wilo Wilo-Para /SC Series - Transport and Storage

Installation and operating instructions Wilo-Para 35
en
* Glycol has a higher viscosity than water. If admixtures
of glycol are used, the pumping data of the pump must
be corrected to match the mixing ratio.
Intended use includes observing these instructions and
the specifications and markings on the pump.
Misuse Any use beyond the intended use is considered misuse
and will void any warranty claims.
5 Transport and storage
Scope of delivery • High-efficiency circulator
• Installation and operating instructions
Accessories Accessories must be ordered separately. For a detailed
list and description, consult the catalogue.
The following accessories are available:
• Mains connection cable
• iPWM signal cable
• Thermal insulation shell
• Cooling shell
NOTICE
Only introduce ready-to-use mixtures to the
system. The pump must not be used to mix fluid
in the system.
WARNING!
Danger of injury or material damage from improper
use!
• Never use non-specified fluids.
• Never allow unauthorised persons to carry out work.
• Never operate the pump beyond the specified limits
of use.
• Never carry out unauthorised conversions.
• Use authorised accessories only.
• Never operate with phase angle control.