Installation and operating instructions Wilo-Para 39
en
5 Transportation and storage
Scope of delivery • High-efficiency circulator
• Installation and operating instructions
Accessories Accessories must be ordered separately. For a detailed
list and description, consult the catalogue.
The following accessories are available:
• Mains connection cable
• iPWM/LIN signal cable
• Thermal insulation shell
• Cooling shell
Transport
inspection
Immediately check for transportation damage and com-
pleteness upon delivery, and lodge any complaints
immediately.
Transport and
storage conditions
Protect against moisture, frost and mechanical loads.
Permissible temperature range: -40 °C to +85 °C
(for max. 3 months)
6 Installation and electrical connection
6.1 Installation
May only be installed by qualified technicians.
WARNING!
Risk of burns from hot surfaces!
Pump housing (1) and glandless motor (2) may become
hot and cause burns if touched.
• During operation, only touch the control module (5).
• Allow the pump to cool down before commencing
any work.
To Next Page
Loading...
Need help?
General
