Wilson Audio Specialties
2. Locate the cable marked “MID FREQ.” This cable exits the top of the
Woofer Module just below the appropriate connector. Connect the RED lug
of the cable to the RED (positive) terminal on the terminal labeled “Mid-
range.” Connect the black lug of the cable to the BLACK (negative) termi-
nal.
3. Locate the cable marked “High Freq.” Connect the RED lug to the RED
terminal on the connection labeled “High Frequency” on the Upper Array.
Connect the black lug of the cable to the BLACK (negative) terminal.
Note: Please ensure that you do not invert the polarity of the umbilicals in the Alexia.
Such an inversion will produce entertaining ambient effects, but destroys the linearity
and harmonic structure of the system.
To Next Page
Loading...
