59
Wilson Audio Specialties
s e C T i O n 6 . 1 – T r O u b l e s h O O T i n g
If the problem is solved:
If the problem persists:
If the problem is solved:
If the problem persists:
Turn the amplifier off. Disconnect the
speaker leads at the main input to the
speaker. Now turn on the amplifier.
Call your Wilson Audio dealer. There
may be a problem with the crossover
or the speaker’s internal wiring.
Continue to the next step.
Turn the amplifier off and disconnect
it from the AC wall outlet. Disconnect
the speaker cable leads to the ampli-
fier and turn the amplifier on again.
You have a short in your speaker ca-
bles. Check for frayed ends, holes
(from spike feet), or make sure that
your spade lug is not touching the
chassis while it is connected to the
binding post.
Call the dealer where you bought your
amplifier. You appear to have a prob-
lem with this component.
To Next Page
Loading...
